Author |
Message |
dwillie65 Samba Member
Joined: January 15, 2008 Posts: 52 Location: Prosperity, South Carolina
|
Posted: Tue Jan 22, 2008 2:28 pm Post subject: Factory to 2.5" Drop Spindles? |
|
|
I have a stock 65 bug and would like to lower the front 2.5". I am reading a lot of info on this topic and do not want to go wrong due to a low budget. I would like to know what size tire ,on stock smoothies, I can put on the front after lowering without rubbing. Hope this is the way to post a topic, I am new to Samba. |
|
Back to top |
|
|
Ragman The Sambinator
Joined: July 18, 2003 Posts: 3517 Location: Denver
|
Posted: Tue Jan 22, 2008 2:57 pm Post subject: Re: Factory to 2.5" Drop Spindles? |
|
|
dwillie65 wrote: |
I have a stock 65 bug and would like to lower the front 2.5". I am reading a lot of info on this topic and do not want to go wrong due to a low budget. I would like to know what size tire ,on stock smoothies, I can put on the front after lowering without rubbing. Hope this is the way to post a topic, I am new to Samba. |
There are quite a few options depending on what you are looking for. These are the most typically used tires on lowered bugs.
135R15
145R15
Since you are only going 2 1/2 down, I'd say go for the 145R15....provided you aren't planning on alot of 'spirited' driving. If you are planning on driving fast and stopping fast, you might want a wider contact patch. |
|
Back to top |
|
|
dwillie65 Samba Member
Joined: January 15, 2008 Posts: 52 Location: Prosperity, South Carolina
|
Posted: Wed Jan 23, 2008 6:11 am Post subject: |
|
|
What size tire would give me a wider patch without rubbing? I was under the imprestion that the 135's, 145's wouldn't rub because of them being narrow. Am I totally wrong or am I in the right ballpark When you say 145/15, would that mean 145/65/R15, or 145/80/R15? |
|
Back to top |
|
|
Joval Samba Member
Joined: January 15, 2007 Posts: 176 Location: Ireland
|
Posted: Wed Jan 23, 2008 1:39 pm Post subject: |
|
|
If there's no profile marked they're 80.
I had 155/15 on 5.5 steelies, didn't work, 155/15 on 4.5 steelies, much better - but 135/15 were perfect. |
|
Back to top |
|
|
Stinde Samba Member
Joined: October 18, 2003 Posts: 81 Location: Europe
|
Posted: Thu Jan 24, 2008 7:56 am Post subject: |
|
|
will 165/65 fit and work whitout rub? or 165/50 ? Any experiences whit stock wide front and dropped spindles? |
|
Back to top |
|
|
Alan Willis Banned
Joined: November 22, 2004 Posts: 4181 Location: booted from the SEWR and stalked in here
|
Posted: Thu Jan 24, 2008 8:47 am Post subject: |
|
|
Joval wrote: |
If there's no profile marked they're 80.
I had 155/15 on 5.5 steelies, didn't work, 155/15 on 4.5 steelies, much better - but 135/15 were perfect. |
Actually they're '78' _________________ die schwarzen Schafe #666 |
|
Back to top |
|
|
Joval Samba Member
Joined: January 15, 2007 Posts: 176 Location: Ireland
|
Posted: Thu Jan 24, 2008 3:17 pm Post subject: |
|
|
Alan Willis wrote: |
Actually they're '78' |
If we're splitting hairs - 80 is assumed but it varies by manufacturer. |
|
Back to top |
|
|
|