morymob |
Thu May 07, 2015 4:39 am |
|
Look in junk yds 4 crv's, under rear mat is this sq cover over a storage area underneath, this 'lid' is a table with folding legs, honda quality. Hate to look like a dummy but yesterday i had reason to do more than just raise lid to stuff something underneath, look 4 early yrs may be same on later yrs also. If your pass side seat don't swivel grab the folding cup holder thing between frnt seats while u r there. |
|
Canadian VW |
Thu May 07, 2015 4:42 am |
|
I have this in my 2002. Should be the same for all 2002 to 2006 models. |
|
chojinchef |
Thu May 07, 2015 5:06 am |
|
Took the table out of my wife's '99 CRV before trading in for the GTI she has now.
Always hated that car, but still have the table.
The dimensions of said table are 28x30.5 and opens up to a 24 inch height. |
|
morymob |
Thu May 07, 2015 5:17 am |
|
I have a scrap piece of cabinert grade plywood that just suddenly may fit this opening with matching grey finish! What westy needs........... |
|
Merian |
Thu May 07, 2015 11:03 am |
|
pics? |
|
PDXWesty |
Thu May 07, 2015 11:11 am |
|
http://www.ebay.com/sch/i.html?_from=R40&_trks...p;_sacat=0
|
|
climberjohn |
Fri May 08, 2015 11:35 am |
|
Well, the things I learned about my Honda on this Volkswagen forum!
I have a 2004 CRV, and I just went out and had to check.
Sure enough, there's a beautiful table there that I haven't used since I bought the car!
(In all fairness, my wife bought the car and give it to me a couple of years ago…) |
|
kamzcab86 |
Fri May 08, 2015 12:36 pm |
|
Quite the clever idea.
Apparently, the Element has a table as well, but it requires a separate purchase of table legs, which are now NLA. |
|
newfisher |
Fri May 08, 2015 4:41 pm |
|
Found one!
As im still at work, I sent the wife on a mission to grab the hidden table.
Me: Hi, have any 96 to 02 Honda Crv's?
Wrecking yard: yes, 3 of them.
Me: im looking for the plastic cover under the rear carpet in the cargo compartment, kinda like a spare tire well cover but square.
Wrecking yard: let me send a guy out and look, do you want it if he finds one?
Me: yes! If I send my wife over before you close, whats it going to cost me.
Wrecking yard: nothing, just remember us when you buy parts that I inventory
Me: THANKS! |
|
rubbachicken |
Fri May 08, 2015 5:20 pm |
|
that's cool, how this is it when closed, i'm wondering if it'd attach to the inside of the sliding door. |
|
photogdave |
Fri May 08, 2015 5:51 pm |
|
rubbachicken wrote: that's cool, how this is it when closed, i'm wondering if it'd attach to the inside of the sliding door.
Or fit over the rear decklid of a westy... |
|
TequilaSunSet |
Fri May 08, 2015 6:25 pm |
|
29.9 x 33.5 x 26.7 inches tall |
|
chojinchef |
Fri May 08, 2015 6:34 pm |
|
TequilaSunSet wrote: 29.9 x 33.5 x 26.7 inches tall
Not sure if that's the later model sized, earlier were a bit smaller as per post above. |
|
photogdave |
Fri May 08, 2015 6:42 pm |
|
I'm at work so I can't measure my van right now. Will check tomorrow. |
|
newfisher |
Fri May 08, 2015 9:10 pm |
|
rubbachicken wrote: that's cool, how this is it when closed, i'm wondering if it'd attach to the inside of the sliding door.
Thats a great idea!
Ill measure tomorrow. Its a nice height for sitting on the floor with the slider open or bag lawn chair height.
|
|
dhaavers |
Sat May 09, 2015 6:39 am |
|
I've already reserved the table from my sister's CRV since she bought it
last year...when she gets rid of that car, I'll have myself a free table! 8) |
|
newfisher |
Sun May 10, 2015 2:35 pm |
|
Crappy pic but I found a spot behind the edgestar on the drivers side panel.
Too thick to mount to the sliding door and uncomfortable when shoved flat under the rear of the bed.
|
|
Italjohn |
Sun Jan 06, 2019 2:00 pm |
|
Did install my Honda CR-V folding table today, and boy I'm I happy with the result :D
|
|
Paulbeard |
Sun Jan 06, 2019 2:43 pm |
|
Makes me want to put mine in…nice job trimming down the soft bits for a better fit. |
|
Sodo |
Sun Jan 06, 2019 2:50 pm |
|
That's nice ItalJohn. I like the forward release lever too. Can the molded plastic tabletop be unscrewed from that mechanism? If it's flat, can it be replaced with a Westy plywood tabletop? |
|
Powered by phpBB © 2001, 2005 phpBB Group
|