| carcentric |
Sun Oct 12, 2003 10:03 am |
|
| I'll be using PPG's DBC (2k, with clearcoat) for most of my car, but I'll be doing the rockers in a different color with Ultra (1k, no clearcoat). Does it matter which goes on first? I'm thinking it doesn't. |
|
| Chillkoot |
Sun Oct 12, 2003 12:09 pm |
|
| I would do the 1k first... then Clear the whole thing.. that way when you colorsand there wont be a hard edge... J |
|
| BIG MAC |
Sun Oct 12, 2003 10:33 pm |
|
| Why even bother using the single stage? |
|
| carcentric |
Tue Oct 14, 2003 8:21 am |
|
1. The rocker panel area will get rock chipped and catch most of the roadtar - touch-ups will be faster/easier with 1k.
2. I want a different reflectivity as well as a different color - the 2k on the rest of the car will be clear coated, but the 1k down low won't be clear coated, so it'll be flatter. |
|
| Chillkoot |
Tue Oct 14, 2003 12:15 pm |
|
ok...
use chip gard.. SEm .. you can shoot that smooth or textured..Hard line ar the easiest thing to chip just so youknow... |
|
Powered by phpBB © 2001, 2005 phpBB Group
|