| blitzkrieg59 |
Thu Aug 09, 2007 6:00 pm |
|
Anyone here ever adjusted the vacuum advance on their Mallory Uni lite distributor? I have a camper special and the full timing is set at 28 degrees advance as per Jake, now I need to set the initial vacuum advance to 12. I have NO idea how to do this. I bought this advance timing light:
here |
|
| krusher |
Fri Aug 10, 2007 12:06 am |
|
Email jake he will tell you and also tell you of any pitfalls to ook out for.
:D |
|
| Eaallred |
Fri Aug 10, 2007 6:03 am |
|
| stick an allen wrench in the vacuum port to adjust it. |
|
| Bones 53 |
Wed Sep 02, 2009 7:53 pm |
|
| Which way do you turn it to adjust and what does the adjustment actually accomplish? |
|
| krusher |
Thu Sep 03, 2009 12:20 am |
|
Bones 53 wrote: Which way do you turn it to adjust and what does the adjustment actually accomplish?
Its going to adjust how much advance you get compared to how much vacuum is being pulled. |
|
| Bones 53 |
Fri Sep 04, 2009 5:12 pm |
|
| Here is the info I was looking for since I couldn't find my instructions until today. This info is from Mallory. "The 47 series has 24 degrees mechanical advance at about 3200 rpm. The vacuum advance is adjsutable and is preset at 10 degrees fro mthe factory. To take vacuum advance out use a 5/32 allen and insert it into the nipple. 1 full turn CW takes about 2-3 degrees out." |
|
Powered by phpBB © 2001, 2005 phpBB Group
|