Author |
Message |
DubNuts Samba Member
Joined: January 06, 2009 Posts: 194
|
Posted: Sun Jun 19, 2016 6:02 pm Post subject: D.I.Y. Tag (license plate door) Prop |
|
|
I've been making these Tag Props for Friends and Customers for years, but never dawned on me that I've never shared with Samba folk..
So here you go.. Never drop, lose, or break your Oil, or Water Caps again trying to use them to prop your tag door open. Or chasing them down a hill as they roll away from you in the darkness..
This pic shows how it's used.. BTW the pink is so you can find it if you drop it, this one a well used demo prop.
Here's How You Make a new one.. Simply use a paint stirrer, cut to about 9 1\4"
Check to be sure it's not to long so it can be stowed..
And this is how you store it away, where it will always be handy and accessible.. On some van's you may have to take a pair of needlenose pliers and widen the tag inspection door fastener a tad.
Also normally the paint stirrer fits snuggly into the fastener, but have had a few that I had to sand the paint stirrer a little..
Best Of Luck to you Enjoy |
|
Back to top |
|
|
pablum Samba Member
Joined: December 17, 2015 Posts: 562
|
Posted: Sun Jun 19, 2016 6:17 pm Post subject: Re: D.I.Y Tag Prop |
|
|
d00d, that's like... huge! |
|
Back to top |
|
|
djkeev Samba Moderator
Joined: September 30, 2007 Posts: 32632 Location: Reading Pennsylvania
|
|
Back to top |
|
|
jcolbyc Samba Member
Joined: October 31, 2015 Posts: 36 Location: charlotte
|
Posted: Mon Jun 20, 2016 11:27 am Post subject: Re: D.I.Y Tag Prop |
|
|
Nice idea. Thanks for posting many will find this useful. |
|
Back to top |
|
|
Corwyn Samba Member
Joined: December 29, 2009 Posts: 2238 Location: Olympia, Washington
|
|
Back to top |
|
|
WLD*WSTY Samba Member
Joined: November 04, 2009 Posts: 438 Location: Arizona
|
Posted: Mon Jun 20, 2016 10:17 pm Post subject: Re: D.I.Y. Tag (license plate door) Prop |
|
|
Just remove the springs from the hinges - no props necessary! _________________ '82 SyncroWesty, the first ever conversion.'06 Subaru 2.5L |
|
Back to top |
|
|
djkeev Samba Moderator
Joined: September 30, 2007 Posts: 32632 Location: Reading Pennsylvania
|
|
Back to top |
|
|
shadetreetim Samba Member
Joined: January 10, 2011 Posts: 1994 Location: Riverside, California
|
Posted: Wed Jun 22, 2016 4:49 pm Post subject: Re: D.I.Y. Tag (license plate door) Prop |
|
|
I prefer to hold mine open from the inside...
_________________ Tim Potts
Doing my best every time I drive it to dispel the myth these Vanagons have to be slow!
'89 Vanagon Bluestar/Country Homes 1.8T & .77 4th
'74 Jeep CJ5 |
|
Back to top |
|
|
Alluvial Van Samba Member
Joined: November 10, 2012 Posts: 132 Location: San Diego, CA
|
Posted: Sun Jun 26, 2016 12:46 am Post subject: Re: D.I.Y. Tag (license plate door) Prop |
|
|
That's great. Especially love that it can be stowed right there at the license plate. Thanks for sharing.
Removing the springs from the hinge isn't a bad idea either. |
|
Back to top |
|
|
|