Author |
Message |
volks1500 Samba Member
Joined: March 25, 2009 Posts: 14 Location: Anaheim CA
|
Posted: Fri Jun 17, 2016 10:05 pm Post subject: KDK Engine numbers |
|
|
Hi,
Ok I have a 1943 Kubelwagen and it has the wrong engine (36hp). I don't want to change the engine since it drives better with this one but I do want to have an original engine for it. I found a 25hp engine that the owner says is a 1943 engine but I can find any charts or websites that help brake down the engine numbers for 25hp engine and when they where built. Does anyone know one?
Thanks |
|
Back to top |
|
|
Bruce Samba Member
Joined: May 16, 2003 Posts: 17288 Location: Left coast, Canada
|
Posted: Fri Jun 17, 2016 10:42 pm Post subject: Re: KDK Engine numbers |
|
|
Get a photo of the engine number and post it here.
A Kubel will have an engine number starting with 2- _________________
overheard at the portland Swap Meet... wrote: |
..... a steering wheel made from a mastadon tusk..... |
|
|
Back to top |
|
|
volks1500 Samba Member
Joined: March 25, 2009 Posts: 14 Location: Anaheim CA
|
Posted: Sat Jun 18, 2016 10:39 am Post subject: Re: KDK Engine numbers |
|
|
The engine number is 2-028272.
|
|
Back to top |
|
|
Bruce Samba Member
Joined: May 16, 2003 Posts: 17288 Location: Left coast, Canada
|
|
Back to top |
|
|
a1steaksauce Samba Member
Joined: September 23, 2010 Posts: 612
|
Posted: Sat Jun 18, 2016 6:27 pm Post subject: Re: KDK Engine numbers |
|
|
Bruce wrote: |
That's a '43 engine number. |
And that's all that it is. terrible restamp is terrible. That's probably not a Kdf case.
Join the kubel korps if you're serious about learning Kdf era cars. VW people are clueless when it comes to them. |
|
Back to top |
|
|
volks1500 Samba Member
Joined: March 25, 2009 Posts: 14 Location: Anaheim CA
|
Posted: Sat Jun 18, 2016 7:19 pm Post subject: Re: KDK Engine numbers |
|
|
Where can I join the Kubel korps at?
Thanks |
|
Back to top |
|
|
Martin Southwell Samba Member
Joined: November 24, 2010 Posts: 984 Location: Bath, England
|
Posted: Sun Jun 19, 2016 3:46 am Post subject: Re: KDK Engine numbers |
|
|
If you look at the right hand crankcase half, behind the crankshaft pulley, at about 2 O'clock, and higher than normal, you'll see the production date stamp, which ends .43, which would indicate a 1943 engine. Obviously more pictures woud help.
As for the number stampings, it looks like something done after a drink or two, or on a dark night! |
|
Back to top |
|
|
Martin Southwell Samba Member
Joined: November 24, 2010 Posts: 984 Location: Bath, England
|
Posted: Sun Jun 19, 2016 3:49 am Post subject: Re: KDK Engine numbers |
|
|
Forgot to mention, that for information & help on Kubels/Schwimmers, then this is a very good web-site: http://vw166.com/ |
|
Back to top |
|
|
a1steaksauce Samba Member
Joined: September 23, 2010 Posts: 612
|
Posted: Sun Jun 19, 2016 5:41 am Post subject: Re: KDK Engine numbers |
|
|
volks1500 wrote: |
Where can I join the Kubel korps at?
Thanks |
I'll pm you their club info. |
|
Back to top |
|
|
Jacks Samba Member
Joined: July 15, 2006 Posts: 2347 Location: San Clemente, Ca.
|
Posted: Sun Jun 19, 2016 8:33 am Post subject: Re: KDK Engine numbers |
|
|
Those numbers look photoshopped to me. Other numbers appear to be visible behind them. _________________ Jack Staggs
Actual name |
|
Back to top |
|
|
blood Samba Member
Joined: October 01, 2015 Posts: 50 Location: nashville tn
|
Posted: Wed Aug 10, 2016 4:08 pm Post subject: Re: KDK Engine numbers |
|
|
I think there are two different kubel cases for the 1943 model year. These photos are for a replacement engine for my 1944 kubel, as you can see this engine was cast on July 29 43 and does not have the perimeter bolts. I think the perimeter bolts were introduced less than a month later. I also have included the engine number which shows what it is supposed to look like and to set a timeline. I have been spending many months gathering up parts and have many more to get before my engine will be complete. Wish you good luck in your project. David Bloodworth |
|
Back to top |
|
|
T2_681 Samba Member
Joined: October 08, 2018 Posts: 67 Location: Czech republic
|
Posted: Sun Dec 29, 2019 2:10 am Post subject: Re: KDK Engine numbers |
|
|
Any new finds as of when exactly the engine case changed to the reinforced version? |
|
Back to top |
|
|
blood Samba Member
Joined: October 01, 2015 Posts: 50 Location: nashville tn
|
Posted: Sun Dec 29, 2019 4:57 pm Post subject: Re: KDK Engine numbers |
|
|
Sorry, no new date info on exact date change. I have to admit I have not been looking for the change over date. |
|
Back to top |
|
|
T2_681 Samba Member
Joined: October 08, 2018 Posts: 67 Location: Czech republic
|
Posted: Mon Dec 30, 2019 5:50 am Post subject: Re: KDK Engine numbers |
|
|
OK
When you say the reinforced cases came possibly a month later, do you mean the date they were cast? |
|
Back to top |
|
|
|