Author |
Message |
cbdubs Samba Member
Joined: December 13, 2013 Posts: 87 Location: Scarborough UK
|
Posted: Thu Mar 09, 2017 7:31 am Post subject: Re: LED tail lights and turn signals for 1965 beetle |
|
|
I've bought Chips lights for the my 58 bug to fit inside my snowflakes. They have stop/tail and indicators in one unit and are really clear. I got the correct relays from him too. Easy to install and look great. I got the indicator led's in yellow so they are nearer UK spec as most other drivers here don't know what a semaphore is! |
|
Back to top |
|
|
arizonabuckeye Samba Member
Joined: November 10, 2013 Posts: 544 Location: SLC
|
Posted: Wed Mar 08, 2017 9:17 am Post subject: Re: LED tailights from Chip |
|
|
Wayne S. Johnson wrote: |
vs-works wrote: |
Chip made a set for my 61...Great Job...and he is super cool guy. They had to be sanded down a little on the side....maybe I can get you a pic of them later tonight.
VS |
Chip has great high quality tail lights. Very low current for such bright tail lights. |
Never seen his light in person but from my interactions with Chip he is a pretty good guy. IMO people don't reach out and interact with others in forums like this if they are at all afraid their product isn't top notch. Endorsing Chip - I will be buying his lights after I get a couple other things that are higher priority sorted. |
|
Back to top |
|
|
Wayne S. Johnson Samba Member
Joined: April 12, 2006 Posts: 1265 Location: GILROY, CA
|
|
Back to top |
|
|
phatdawg Samba Member
Joined: November 16, 2004 Posts: 189 Location: Eureka CA
|
Posted: Sun Mar 05, 2017 11:53 am Post subject: Re: LED tail lights and turn signals for 1965 beetle |
|
|
glutamodo wrote: |
Well, 66 is single filament turn signal bulbs, and in 12V, that would be a 1156 then, or 1156NA if you want a bulb with amber glass, which makes for a better looking light if the lenses are faded. |
Thanks. There are a lot of LED bulbs out there. Lots of them have mixed reviews. I guess you need to just try them out. _________________ -1966 T1 2-tone W/1915 cc
-1965 T1 Project car. Have had for 25 years.
-2000 Jetta VR6. Black and Quick! (GONE)
-2010 Jetta TDI. White and sips fuel.
The older I get the beter I was!!
http://www.thebugshop.org/gotech.htm
http://www.wolfsburgwest.com/ |
|
Back to top |
|
|
glutamodo The Android
Joined: July 13, 2004 Posts: 26315 Location: Douglas, WY
|
Posted: Sat Mar 04, 2017 11:54 pm Post subject: Re: LED tail lights and turn signals for 1965 beetle |
|
|
Well, 66 is single filament turn signal bulbs, and in 12V, that would be a 1156 then, or 1156NA if you want a bulb with amber glass, which makes for a better looking light if the lenses are faded. _________________ Andy T.
IMAGE NOTE: It has been noted that Chrome based browsers may have issues in displaying my vast image library, which use non-secure links and are on an FTP server. Images should still be viewable if the link is clicked though.
I do not know how to fix this. All I can say is it all works fine for me with what I use, Firefox. |
|
Back to top |
|
|
phatdawg Samba Member
Joined: November 16, 2004 Posts: 189 Location: Eureka CA
|
Posted: Sat Mar 04, 2017 11:08 pm Post subject: Re: LED tail lights and turn signals for 1965 beetle |
|
|
Cali_Army_Guy wrote: |
What "front bulb"? The headlight bulb? The turn signal bulb? The parking light bulb? And 1966 was a 6v car not a 12v car. |
My car has been converted to 12v. I was referring to the turn signal. I also think the LED bulbs are a good upgrade. _________________ -1966 T1 2-tone W/1915 cc
-1965 T1 Project car. Have had for 25 years.
-2000 Jetta VR6. Black and Quick! (GONE)
-2010 Jetta TDI. White and sips fuel.
The older I get the beter I was!!
http://www.thebugshop.org/gotech.htm
http://www.wolfsburgwest.com/ |
|
Back to top |
|
|
Cali_Army_Guy Samba Member
Joined: March 19, 2015 Posts: 2094 Location: Stockton, CA
|
Posted: Sat Mar 04, 2017 10:55 pm Post subject: Re: LED tail lights and turn signals for 1965 beetle |
|
|
What "front bulb"? The headlight bulb? The turn signal bulb? The parking light bulb? And 1966 was a 6v car not a 12v car. _________________ 2015 VW Passat Wolfsburg Edition
1966 VW Beetle - Sold |
|
Back to top |
|
|
phatdawg Samba Member
Joined: November 16, 2004 Posts: 189 Location: Eureka CA
|
Posted: Sat Mar 04, 2017 9:38 pm Post subject: Re: LED tail lights and turn signals for 1965 beetle |
|
|
What # is the front bulb for a 66 12 v? _________________ -1966 T1 2-tone W/1915 cc
-1965 T1 Project car. Have had for 25 years.
-2000 Jetta VR6. Black and Quick! (GONE)
-2010 Jetta TDI. White and sips fuel.
The older I get the beter I was!!
http://www.thebugshop.org/gotech.htm
http://www.wolfsburgwest.com/ |
|
Back to top |
|
|
vs-works Samba Member
Joined: May 11, 2010 Posts: 111 Location: La Canada Flintridge, CA
|
Posted: Wed Jan 30, 2013 3:09 pm Post subject: LED tailights from Chip |
|
|
Chip made a set for my 61...Great Job...and he is super cool guy. They had to be sanded down a little on the side....maybe I can get you a pic of them later tonight.
VS |
|
Back to top |
|
|
'69Custom Samba Member
Joined: September 16, 2008 Posts: 2497 Location: Ventura, California
|
Posted: Wed Jan 23, 2013 7:18 pm Post subject: |
|
|
VOLKSWAGNUT wrote: |
And judging by the videos... they look like ....
Id like to witness those in person, to see if they acaually illuminate the entire lens, or are typical LED directional as the video appears.. |
Behind a lens they are exactly what you'd expect . I only provided that link because options were asked for, not as an endorsement. _________________ -Tim
1969 Frankenbug
1965 Ford Mustang
:2gunfire: F-U-M-P!
~"I thought I was wrong once, but I was mistaken." ~The Boss
Please excuse any typos as my iPhone doesn't speak English very well.
tham64 wrote: |
Why tune a big round again and again????? For me.... 1 hour will solve the case |
www.endlesscustomz.com |
|
Back to top |
|
|
'69Custom Samba Member
Joined: September 16, 2008 Posts: 2497 Location: Ventura, California
|
Posted: Wed Jan 23, 2013 7:15 pm Post subject: |
|
|
glutamodo wrote: |
Ouch, those kits are expensive. And even worse - they effectively convert the rear lights to "one bulb" operation - and for someone like myself who has Euro style tail light lenses, that is not an option. I would like to know how well they look and work for someone with stock USA-spec all-red taillight lenses.
I'd rather put in matching-color LED bulbs myself, if I was going to LEDs.
-Andy |
Agreed, Andy. I've seen demos of that Technostalgia set up with US spec lenses I concluded it was a half-assed attempt and a shoddy result. About all it has going for it is the rapid pulse, but so what?
United Pacific began producing exactly what you and I would love to see, individual areas devoted to each bulb represented but, so far as I'm aware they only make one for the late model Bug.
Until someone makes something quality and worth the investment, I'll stick to seperate LEDs. I have a car-wide set on its way in the mail as we speak. _________________ -Tim
1969 Frankenbug
1965 Ford Mustang
:2gunfire: F-U-M-P!
~"I thought I was wrong once, but I was mistaken." ~The Boss
Please excuse any typos as my iPhone doesn't speak English very well.
tham64 wrote: |
Why tune a big round again and again????? For me.... 1 hour will solve the case |
www.endlesscustomz.com |
|
Back to top |
|
|
VOLKSWAGNUT Fastest VW Belt Changer
Joined: October 14, 2007 Posts: 11055 Location: Flippin' a Belt........ .... Off-n-On ... NC USA
|
Posted: Wed Jan 23, 2013 4:29 pm Post subject: |
|
|
And judging by the videos... they look like ....
Id like to witness those in person, to see if they acaually illuminate the entire lens, or are typical LED directional as the video appears.. _________________ aka Ken {o\!/o}
Its your vehicle- stop askin' for approval-do what YOU like for cryin' out loud
Better to roll em' how you want and wear em' out-than lettin' em' rot out
Its about the going not the showing
Rebuilt to drive not decorate
WANTED: Local Eatin' Joints, Triple D for TheSamba contributions here http://www.thesamba.com/vw/forum/viewtopic.php?t=570510
Search "VOLKSWAGNUT" on YouTube since you cant watch a "certain" BELT change video round here
Usually and often edited |
|
Back to top |
|
|
glutamodo The Android
Joined: July 13, 2004 Posts: 26315 Location: Douglas, WY
|
Posted: Wed Jan 23, 2013 3:54 pm Post subject: |
|
|
Ouch, those kits are expensive. And even worse - they effectively convert the rear lights to "one bulb" operation - and for someone like myself who has Euro style tail light lenses, that is not an option. I would like to know how well they look and work for someone with stock USA-spec all-red taillight lenses.
I'd rather put in matching-color LED bulbs myself, if I was going to LEDs.
-Andy _________________ Andy T.
IMAGE NOTE: It has been noted that Chrome based browsers may have issues in displaying my vast image library, which use non-secure links and are on an FTP server. Images should still be viewable if the link is clicked though.
I do not know how to fix this. All I can say is it all works fine for me with what I use, Firefox. |
|
Back to top |
|
|
'69Custom Samba Member
Joined: September 16, 2008 Posts: 2497 Location: Ventura, California
|
Posted: Wed Jan 23, 2013 11:07 am Post subject: |
|
|
http://www.cool-leds.com/1962-67-vw-led.htm _________________ -Tim
1969 Frankenbug
1965 Ford Mustang
:2gunfire: F-U-M-P!
~"I thought I was wrong once, but I was mistaken." ~The Boss
Please excuse any typos as my iPhone doesn't speak English very well.
tham64 wrote: |
Why tune a big round again and again????? For me.... 1 hour will solve the case |
www.endlesscustomz.com |
|
Back to top |
|
|
dougnkaren Samba Member
Joined: March 20, 2012 Posts: 26 Location: Oak Ridge, NC
|
Posted: Sun Jan 20, 2013 10:26 am Post subject: LED Lights |
|
|
I don't have much to tell. I ordered the incorrect lights and the new tail light assemblies I ordered to remedy the corrosion would not fit even though I ordered the right year make and model. Just some bad luck. I ended up just polishing the existing assemblies and made sure all contacts were bright and shiny and we've just been doing fine with those. I looked at the lights you posted about and they look good. If you buy them and use them let me know how they work. I am selling my house and retiring so all projects are on hold until I get to my next house and get a garage set up. I'll try something then guaranteed. Sorry I was no help just yet.
Doug |
|
Back to top |
|
|
911GT2 Samba Member
Joined: January 19, 2013 Posts: 180 Location: Nederland
|
Posted: Sat Jan 19, 2013 10:10 am Post subject: |
|
|
I'm very curious of your findings.
Could you please post some feedback?
I'm especially interested in these lights. Das anybody got them? |
|
Back to top |
|
|
dougnkaren Samba Member
Joined: March 20, 2012 Posts: 26 Location: Oak Ridge, NC
|
Posted: Wed Sep 12, 2012 6:20 pm Post subject: Thanks |
|
|
Thanks Reedwesd those were a bit pricey and I've already ordered some from another site. I'll see how they look and someone else had sent a link from past forum posts on this subject and that was very informative. I will post the results of my experiments one way or the other. |
|
Back to top |
|
|
reedwesd Samba Member
Joined: August 28, 2004 Posts: 144 Location: G-Town KY
|
Posted: Tue Sep 11, 2012 7:20 pm Post subject: |
|
|
I know you can pick up led 1157 bulbs at the parts house here and and truck stops since they have started to convert over. If you need 6v then you could try Ron Francis. They are price but may be able to find them cheaper somewhere else.
http://www.ronfrancis.com/prodinfo.asp?number=LR%2D67
BTW I have converted my 65 over and you may need to run a load res if you have problems with them flashing to fast. |
|
Back to top |
|
|
dougnkaren Samba Member
Joined: March 20, 2012 Posts: 26 Location: Oak Ridge, NC
|
Posted: Tue Sep 11, 2012 3:00 am Post subject: Single / Double |
|
|
the tail lights are double and this one is single pole. Wont work for the 65 tail lights. It's got to be a replacement style for a 1157 |
|
Back to top |
|
|
glutamodo The Android
Joined: July 13, 2004 Posts: 26315 Location: Douglas, WY
|
Posted: Mon Sep 10, 2012 7:13 pm Post subject: |
|
|
Too bad those seem to be fairly weak LEDs. (16/3 lumen for the red one.)
Here's another one I came across - they don't give any intensity specs though.
http://www.ledlight.com/s25-24-led-light-6-volt-dc.aspx _________________ Andy T.
IMAGE NOTE: It has been noted that Chrome based browsers may have issues in displaying my vast image library, which use non-secure links and are on an FTP server. Images should still be viewable if the link is clicked though.
I do not know how to fix this. All I can say is it all works fine for me with what I use, Firefox. |
|
Back to top |
|
|
|