Hyd clutch pedal

[58Dub]

does anyone have pics of a pedal setup installed you are using if you convert to ta hydraulic clutch?
thanks
_________________
58 Beetle (now just a pile of parts in the corner)
60 Beetle (2221 turbo under construction)
70 Beetle Baja project

[Aerindel]

Nope. Its so simple I never thought to take a picture of it.

You just buy it, bolt it in, run your tubing. Enjoy.
_________________
Homemade woods/street, bug out rail. IRS, Balljoint front end. 1967 1600cc DP, Weber 32/36 progressive, tri-mil quiet pack. Rear only cutting brakes.

http://www.thesamba.com/vw/forum/viewtopic.php?t=630046

[58Dub]

So... did you use a complete 3 pedal assembly, or just a single pedal for the clutch?
_________________
58 Beetle (now just a pile of parts in the corner)
60 Beetle (2221 turbo under construction)
70 Beetle Baja project

[ORANGECRUSHer]

A better question would be what size MC? lol
_________________
Brian H.
I may not know everything,but I will try to help if I can
OrangeCrushER Berrien Warrior 2.4L Quad4
LAZY MARY 1970 Baja 1835cc

[Aerindel]

[smileyman3000]

Hey mate. I am using a stock T3 master in my baja because I am using the T3 5 Speed with the stock hydro clutch setup.

Installed next to the bus master. I had to move it over.

With the pedals I moved the pin over onto the brake pedal. And added a second one on the clutch pedal to push the clutch slave in.

More pictures/etc about a quarter of the way down page 9 of my build.
And then it all assembled is right near the bottom of that page.

http://www.thesamba.com/vw/forum/viewtopic.php?t=5...;start=160


Smiley

[58Dub]

[3gengines]

This is what I used.[/img]

[58Dub]

[dustymojave]

Also takes a fair bit of fabricating to fit it into the VW foot well.
_________________
Richard
Offroading VW based cars since 1965
Tech Inspection 1963 - 2012 SCCA/SCORE/HDRA/MORE/MDR +
Retired from building Bajas, Fiberglass Buggies and Rails in the Mojave Desert. Also Sprints & Midgets, Dry Lakes, Road Race cars. All types New and Vintage
SoCalBajas Member
Kicked Cancer's A$$...1st and 2nd round...Fight ain't over yet.

[3gengines]

Yeah, I have a rail buggy and I am a fabricator and build race cars on the side, so it's not too bad. I can see where that would be difficult to fit into a bug foot well. I have seen some really nice petal set ups that are pretty reasonable. Mine had a stock set up that worked really well. I changed because I got a really good deal from Wilwood on the petals. Then I had to buy an all new disc brake set up because I had two master cylinders now. My buggy had no front brakes before. Oh well, big boy toys right?

[red caddy]

This was the easiest, cleanest set up I could come up with. A serious PITA to try and fit into a Baja, but perfect for a rail or tube car.
_________________
If it turns $$$ into smoke and noise, I'm there.

My last build thread. http://www.thesamba.com/vw/forum/viewtopic.php?t=466571

[protocox]

Hello,
I use single pedal on my towd, one for clutch and one with 2 MC for brake ( 4 discs brake ) all are 3/4 MC.
I install them Under the Hood to reduce the contact with dust/mud

I'll try to take better pictures asap

[dustymojave]

There is a LOT that I like about your Tow'd. Nice buggy.
_________________
Richard
Offroading VW based cars since 1965
Tech Inspection 1963 - 2012 SCCA/SCORE/HDRA/MORE/MDR +
Retired from building Bajas, Fiberglass Buggies and Rails in the Mojave Desert. Also Sprints & Midgets, Dry Lakes, Road Race cars. All types New and Vintage
SoCalBajas Member
Kicked Cancer's A$$...1st and 2nd round...Fight ain't over yet.